series 0625 pin-line headers with screw machine contacts note: aries specializes in custom design and production. in addition to the standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. aries reserves the right to change product specifications without notice. features: ? aries pin-line headers are available with a variety of screw machined con- tacts. consult data sheet no. 12034 for strip-line headers with coined contacts. ? break feature allows header to be cut to the number of positions desired. ? side-to-side and end-to-end stackable. specifications: ? body material is black ul 94-v0 glass-filled 4/6 nylon. ? fork and post style cont acts are brass alloy 360 1/2 hard per uns c36000 astm-b16-00. ? solder cup style contact is phosphor bronze alloy per 544 uns c54400 astm-b139-01. ? contact plating is either 10 [.25m] min. gold per mil-g-45204 or 200 [5.08 m] min. 93/7 tin/lead per astm b545 or 200 [5.08 m] min. tin per astm b545 type 1 over 100 [2.54m] min. nickel per sae-ams- qq-n-290. ? contact current rating=2 amps (3 amps for pin style 5). ? operating temperature= -67f to 221f [-55c to 105c] tin & tin/lead plating, = -67f to 257f [-55c to 125c] gold plating. ? fork contact accepts up to .035 [.89] diameter leads. mounting considerations: ?suggested pcb hole size=.028 .002 [.71 .05] dia. a ll dimensions : inches [ millimeters ] ordering informa tion a=no. of pins per row x .100 [2.54] b=(no. of pins per row - 1) x .100 [2.54] consult data sheet no. 12034 for strip-line headers with coined contacts. all tolerances .005 [.13] unless otherwise specified printouts of this document may be out of date and should be considered uncontrolled 12036 rev. e xx-0625-xxxx no. of pins: 1 to 25 series plating: 0=tin 0tl=tin/lead 1=gold pin style (see below) bristol, pa usa tel: (215) 781-9956 fax: (215) 781-9845 http://www.arieselec.com ? info@arieselec.com abc
|